Sony Trinitron GDM-F400 Manual De Instrucciones página 6

Setup
Before using your monitor, check that the following accessories
are included in your carton:
• Power cord (1)
• HD15 video signal cable (1)
• USB cable (1)
• Macintosh adapter (1)
• Windows Monitor Information Disk (1)
• Warranty card (1)
• Notes on cleaning the screen's surface (1)
• This instruction manual (1)
Step 1: Connect your monitor to
your computer
Turn off the monitor and computer before connecting.
x x x x Connecting to an IBM PC/AT or compatible
computer
R
(HD15)
to video output
IBM PC/AT or compatible
computer
If your PC system is not compatible with Plug & Play (DDC2AB
or DDC2B+)
This monitor uses the No.9 pin in the video signal connector for Plug &
Play (DDC2AB or DDC2B+) compatibility. See page 5 for the location of
the No.9 pin.
• If your computer accepts the No.9 pin, use the supplied HD15 video
signal cable.
• If your computer does not accept the No.9 pin, please consult your
dealer for advice on obtaining an HD15 adapter.
6
G B HD VD
(BNC)
to HD15
HD15 video signal
cable (supplied)
x x x x Connecting to a Macintosh or compatible
computer
Use the supplied Macintosh adapter.
R
(HD15)
Macintosh adapter (supplied)*
to video
Macintosh or
compatible computer output
* Connect the supplied Macintosh adapter to the computer before
connecting the cable. This adapter is compatible with Macintosh LC,
Performa, Quadra, Power Macintosh and Power Macintosh G3 series
computers. Macintosh II series and some older versions of PowerBook
models may need an adapter with micro switches (not supplied).
x x x x Connecting to the five BNC connectors
R
(HD15)
to VIDEO IN R/G/B
Refer to the preceding
examples to connect to your
computer.
* Connect the cables from left to right in the following order: Red-Green-
Blue-HD-VD.
Notes
• Do not touch the pins of the video cable connector as this might bend
the pins.
• Plug & Play (DDC) does not apply to the five BNC connectors. If you
want to use Plug & Play, connect your computer to the HD15 connector
using the supplied video signal cable.
G B HD VD
(BNC)
to HD15
HD15 video signal
cable (supplied)
G B HD VD
(BNC)
to SYNC IN
HD/VD
video signal cable
(SMF-400, not supplied)*