Trumpf TruTool F 140 Manual Del Usuario página 9

Contents
1 Safety.................................................
2 Product description ............................ 10
3 Operation ........................................... 12
4 Consumables and accessories.......... 13
5 Troubleshooting ................................. 13
6 Declaration of conformity ................... 14
7 Disposal of old power tools and elec-
tronic devices..................................... 14
1 Safety
1.1 General safety instructions
– Read all safety warnings, instructions, il-
lustrations and specifications provided
with this power tool.
Failure to follow all instructions listed be-
low may result in electric shock, fire and/
or serious injury.
– Save all warnings and instructions for fu-
ture reference.
1.2 Additional safety instructions
DANGER
Electrical voltage
Danger to life due to electric shock
Before each use, check the plug, ca-
u
ble, and power tool for damage.
WARNING
Danger of hand injuries due to
sharp blades or edges
Do not reach your hand into the pro-
u
cessing section.
Wear protective gloves.
u
WARNING
Danger of injury or property dam-
age due to use of third-party acces-
sories
Only use original TRUMPF acces-
u
sories.
9
Translation of the original operator's manual
ATTENTION
Property damage due to excessive
power supply voltage
u Make sure that the power supply volt-
age matches the details on the power
tool's nameplate.
1.3 Symbols
The following symbols are important for
reading and understanding the operator's
manual. The correct interpretation of the
symbols helps to operate the power tool
properly and safely.
Symbols Description
Type of the seam locker,
F 140
TruTool F 140 (2A1)
(2A1)
Power tool with power cable
Inspection
Loosen / tighten the hexagon-
head screw
Prepare seam with hammer
Read operator's manual
Disposal/recycling of old devices
and batteries
Li-ion
EN
9