Goodyear GY 2802PS Manual De Instrucciones página 33

English • Owner´s manual
Cutting process
Danger of amputation and serious injury.
Wear suitable gloves when using the machine normally.
The sensor of the anti-cutting system, for those models equipped with it, may be affected by the
use of gloves, so take special care.
Wear suitable clothing, wear safety shoes with non-slip soles.
Wear protective goggles.
1. To make the cut, position the branch between the blade and the counter-blade and press the trigger.
2. When the device is running, keep the other hand at least 15 centimeters away from the cutting area
of the blade, never place your hand on the blade while the scissors are on.
3. As a precaution, keep bystanders at least 1.5 m away..
4. The blade may deteriorate or become blocked if you try to force the cut on branches that are too
large or too dry.
5. Do not handle the tool during the cutting phase, it can be dangerous.
6. Do not use the tool in rainy weather.
7. We recommend that after daily use, you should turn off the scissors and remove the battery from the
scissors and place them inside the complementary case
ATTENTION!
In case of difficulty in cutting, check the battery charge and the correct sharpness of the blade.
During the cutting process, if the cutting blade encounters a branch that it cannot cut, it locks and stops,
release the trigger to return to the open position, after which the next cut can be carried out normally.
ATTENTION!
Do not force the blade sideways to avoid damaging the cutting edge of the blade. Check the
operating frequency of the blade to verify the correct working condition of the blade.
DANGER!
The blade may take some time to stop. Do not touch the blade while it is moving to
avoid risk of injury or accident.
Storage
After use, remove the lithium battery pack and clean the blade.
7. MAINTENANCE AND CLEANING
Faulty tools must be repaired by the authorized technical service. Use only original parts, this will ensure
the correct operation of the tool.
33