Publicidad
3.2
Control and display elements
3.3
IO-Link communication interface
3.3.1
Documentation and accessories
8028214/2023/10/20 | SICK
Subject to change without notice
Figure 1: SICK product ID
Table 1: Control and display elements
WTF4
xxxxxx20
Sx-
Teach-Turn adjust‐
ment
4
3
1
2
Green LED: supply voltage active
1
Yellow LED: status of received light beam
2
Press-turn element / Potentiometer / Teach-Button: adjusting the sensing range
3
BluePilot blue: sensing range display
4
The product comes with the IO-Link communication interface.
IO-Link communication is a master-device communication system.
The product can be operated in standard I/O mode (SIO) or IO-Link mode (IOL). All
automation functions and other parameter settings are effective in IO-Link mode and in
standard I/O mode.
The following functions are supported via the standard IO-Link communication inter‐
face:
•
Flexible sensor settings
•
Digital transmission of sensor signals to the IO-Link Master
•
Visualization and configuration of the sensor
•
Diagnostics /condition monitoring
•
Device identification
•
Easy device replacement
•
Events
A detailed description of the configurable functions and associated indices can be
found in the "IO-Link description" technical Information:
electric sensors, SICK Smart Sensors /
Accessory components and additional information are available for integrating and
configuring the IO-Link device. You can find documentation and software, accessories
and links using the SICK Product ID,
page
26.
xxxxxx30
xxxxxx10
Teach-in button
Potentiometer
4
3
2
1
1
IO-Link.
see "Product identification via the SICK product ID",
O P E R A T I N G I N S T R U C T I O N S | WTF4S
OPERATING INSTRUCTIONS
xxxxxxA0
Preset default - no
possibility of setting
4
3
2
1
Technical Information: Photo‐
2
en
27
Publicidad
