Publicidad
OPERATING INSTRUCTIONS
en
34
O P E R A T I N G I N S T R U C T I O N S | WTF4S
NOTE
Allowed range of switching threshold values for foreground suppression:
•
10 mm ... 130 mm
WTF4Sx-xxxxxx2x with Teach-Turn adjustment:
1.
Align sensor with background and press teach-in button (approx. 1 to 3 seconds)
until the yellow LED flashes.
1...3 sec.
2.
The conveyor belt should now be put into operation without any objects. If the
yellow LED lights up permanently during the test run, the sensing range is set
correctly. If an object is located in the light beam, the yellow LED goes out.
3.
If the yellow LED does not light up briefly during the test run, reduce the sensing
range minimally by rotating the Teach-Turn adjustment. This increases the mini‐
mum object height accordingly. Then check the detection with the object.
8028214/2023/10/20 | SICK
Subject to change without notice
Publicidad
