VEVOR MM-ZG01-47 Manual De Instrucciones página 6

KINDLY REMINDER
NOTE：
1.The opening should be near the edge of the jar. Due to the high hardness
of the blade, the position of the opening should not be too far away from
the gear to avoid damaging the blade due to excessive lateral force when
rotating the rocker arm.
2.After use, place the handles together in a horizontal position. Loosen the
spring to extend its service life.
3.Blades and gears are consumables, please check and replace them in
time.
USAGE METHOD
1.When using the can opener for the first time, attach the base to a table or
bench with the base screws and place the can on a metal base. The
handle is in an illuminated position.
2.You will find a slot between the knife and the body. Place the fuselage
into the square hole in the base and properly Pierce the top of the can with
the knife.
3.Bring the handle to the horizontal position and turn the handle to the right.
Can automatically turn until the top of the can rises to cut smoothly, lifting it
out to prevent falling into the can.
4.Lift handle to upright position. Lift the handle and rod and remove the
open can.
Change the blade：
Blade replacement is relatively simple, directly unscrew two screws, you
can complete the blade replacement.
Change the gear：
1.To replace the gear, you need to turn the handle counterclockwise when
the gear does not rotate (you can choose the appropriate tool to stick), and
remove the parts when the handle rotates.
2.When installing the gear, assemble the washers and other accessories in
- 5 -