VEVOR MM-ZG01-47 Manual De Instrucciones página 7

the original sequence, press down the handle (press the internal spring)
and turn the handle clockwise to install the gear and other accessories.
When using the Can Opener at first
time,fix the base on the table or bench
with base screw,then put can on metal
base. With handle in upright position,
you'll find a slot between the knife and
the body,put the body down to the
square hole of the base,rightly making
the knife puncture the top of can.
DIRECTIONS FOR USING
- 6 -
Bring handle to horizontal
position and rum handle to
right.Can antomatically turns
around until top of can is
smoothly cut out.As top of can
raises,Lift it out to prevent
falling into the cans contents.
Lift handle to upright
position.Lift up handle and bar
and rimove opened can.