Publicidad
The pictures already taken do not appear on the LCD
monitor.
The camera is in the Record mode.
—+ Set the Mode dial to"). (P. 142)
® There is no picture in the card.
— NO PICTURE appears on the LCD monitor. (P. 142)
@ There is a problem with the card.
—
See the Error code chart. (P. 72)
The LCD monitor is hard to read.
© The brightness may be incorrectly set,
— Adjust the brightness. (P. 180)
When the camera is connected to a computer, an error
message appears while data is being transferred to the
computer.
@ The cable is not plugged in correctly.
—- Connect the cable correctly. (P. 214)
The power is OFF.
— Turn on the camera and set the Mode dial to " @> " .
(P. 216)
The batteries are exhausted
— Replace the batteries with new ones (P. 54) or use the
optional AC adapter (P. 56).
The serial port is not selected correctly.
—+ Use the operating system software to make sure the
serial port is selected correctly.
® There is no available serial port.
—+ Make one available by following the computer's
instructions.
Publicidad
