Drinking water quality
Dispensing ice
en-us
Disconnecting the ice maker
The water filter included with the
appliance only filters out particles
from the supplied water and does
not filter out bacteria or microbes.
All materials
used in the water
dispenser
are odorless
and tasteless.
If the water has an aftertaste,
this may
be caused
by:
•
Mineral
and chlorine
content
in the
drinking
water
•
Materials
from which
the domestic
water
line or connection
line are
made
Freshness
of the drinking
water. If
water
has not been dispensed
for
an extended
period
of time, the
water
may have a "stale"
taste.
In this case, dispense
approx.
15 glasses
of water and
discard.
The taste and smell of the water can
be improved
by installing
the included
filter cartridge
at the water intake
point.
Dispensing
water
1. Hold an appropriate
receptacle
under the ice and water
dispenser.
2. Keep the water dispenser
button
pressed
until the desired
amount
of water is in the receptacle.
Tip:
The water from the water dispenser
is
cooled
to a palatable
temperature.
If
you would
like colder water, place ice
cubes
in the glass before dispensing
the water.
Keep the ice cube or crushed
ice
button
pressed
and then stop once
the desired
amount
of ice is in the
receptacle.
Ice in the ice cube
dispenser
opening
may otherwise
overfill
the receptacle
or block the
ice cube dispenser
opening.
If crushed
ice was dispensed
before
ice cubes
are dispensed,
some
crushed
ice may still be in the ice
cube
dispenser
opening.
The
crushed
ice will be dispensed
with
the first batch
of ice cubes.
1. Hold an appropriate
receptacle
under the ice and water dispenser.
2. Keep the ice cube or crushed
ice
button
pressed
until the desired
amount
is in the receptacle.
Ice storage bin
The ice storage
bin stores a reserve
supply of ice cubes
the freezer
compartment.
The ice storage
bin fits
perfectly
into the ice and water
dispenser
due to its shape.
Make sure to shut off the water
supply
to the appliance
a few hours
before disconnecting
the ice maker.
If ice cubes
will not be dispensed
for
more than 1 week (such as due to
vacation),
temporarily
disconnect
the
ice cube maker to prevent the ice
cubes
from freezing
together.
1. Press the release
button
and
remove
the ice cube
container.
2. Press the button for 3 seconds
(led lamp is off) behind the ice
cube container
- the ice maker
deactivated.
Is
3. Empty and clean out the ice cube
container.
4. Push the ice cube container
all the
way back onto the supports
until it
locks into position.
Reactivating
the ice maker:
•
Press the button for 3 seconds
(led lamp is on) behind the ice
cube container
- the ice maker
is
activated.
19