Bosch B26FT Serie Instrucciones De Uso Y De Montaje página 23

Cleaning the water collecting
tray
Spilled water collects in the water
collecting tray.
Remove the strainer to empty and
clean. W pe ou_ the water collechng
tray w_tn a sponge or absorbent cloth.
2. Empty the ice cube container and
clean with lukewarm water.
en-us
3. Reach between the openings of
the cover, carefully unhook the
front 4 notches and pull out the
cover.
Cleaning the ice cube
container
Ice cubes will shrink, have a stale
taste and stick together if they have
not been dispensed for an extended
period of time.
Risk of injury!
A fully filled ice cube container is
very heavy. Use caution when
removing the ice cube container.
Press the release button and
remove the ice cube container.
3. Thoroughly dry the container and
screw conveyor to prevent new ice
cubes from sticking.
Inserting the ice cube container
4. Push the ice cube container all the
way back onto the supports until it
locks into position.
If the container cannot be pushed all
the way back, twist the screw
conveyor slightly or remove any ice
cubes that may have stuck to the
insertion area.
Removing special humidity
filter
1. Pull out Vita Fresh drawers by
approx. 4 inches (approx. 10 cm).
2. Flip up the glas plate above the
Vita Fresh drawers and take them
out.
4. Remove the special humidity filter.
5. Clean the special humidity filter
with lukewarm water and let it dry.
6. Insert the special humidity filter.
7. Reattach the rear of the cover,
move it down and make sure the
front part engages.
8. Insert the glass plate and close the
Vita Fresh drawers.
LED light
The appliance features a
maintenance-free LED light.
Risk of eye injury from Class 1M
laser light (IEC 60825)!
Do not look directly into the light
with optical instruments.
These lights must be repaired by
customer service or authorized
technicians only.
23