Cleaning Instructions; Disinfection Instructions - Invacare Softform Manual Del Usuario

Ocultar thumbs Ver también para Softform:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 49
IMPORTANT!
– Keep a cleaning record as part of cleaning the
system.

5.2.3 Cleaning Instructions

Cleaning Covers
(Removal of contaminants such as dust and organic matter)
1. Remove cover for laundering.
2. Launder the cover with maximum temperature as stated
on product label, using a diluted detergent solution
(Instructions on label).
IMPORTANT!
Washing at higher temperatures will cause
shrinkage.
Drying Covers
1. Hang cover from a line or bar and drip dry in a clean
indoor environment.
or
Tumble dry on a low temperature.
IMPORTANT!
– Tumble dry setting must not exceed 40 °C.
– Do not tumble dry for longer than 10 minutes.
– Dry thoroughly before use.
PALIN-014-D

5.2.4 Disinfection Instructions

IMPORTANT!
– Only use disinfectants and methods approved
by your local infection control institution and
follow your local infection control policy.
– Follow your local decontamination protocols.
Disinfecting covers
(Reducing the number of microorganisms)
IMPORTANT!
Failure in disinfection process may result in the
accumulation of reagent that could damage the
polyurethane coating, react with the bed frame,
or negate the biocompatibility results.
– Ensure that all cleaning agents, and
disinfectants, are thoroughly rinsed off.
– Dry thoroughly before use.
1. Wipe down the cover with a suitable detergent.
2. Rinse the cover thoroughly with clean water using a
single use nonabrasive cloth.
3. Dry the cover thoroughly.
Maintenance
13

Publicidad

Tabla de contenido
loading

Tabla de contenido