cecotec CONGA 7490 IMMORTAL X-TREME Manual De Instrucciones página 55

3. OPERATION
Robot vacuum cleaner's buttons
Auto Mode
- Press the Start/Pause button on the robot vacuum cleaner or select it in the app to make it
start cleaning automatically in Edge mode and then perform a cleaning cycle in an orderly
zigzag pattern while it also recognises which areas have been cleaned and which have
not. The robot vacuum cleaner will automatically plan the cleaning route during cleaning.
If you control the robot vacuum cleaner manually during this mode, the robot will
-
recalculate the route, so it may pass through already cleaned areas. To ensure efficient
cleaning, do not operate the robot vacuum cleaner manually during automatic cleaning.
Thanks to its Total Surface 2.0 technology, if the battery is low during the cleaning cycle,
-
the robot vacuum cleaner will smartly return to the charging base automatically and, once
fully charged, it will resume the cleaning process from the same point.
During cleaning, the robot vacuum cleaner will stop briefly to evaluate the area and
-
calculate the cleaning route (this stop will vary depending on the house conditions).
Back Home mode
- Press the Back Home button on the robot vacuum cleaner or from the app to send the robot
vacuum cleaner to the charging base. The robot vacuum cleaner will stop vacuuming until
it reaches the base.
- This mode can be activated during any cleaning cycle.
The robot vacuum cleaner will take the shortest route back to the charging base thanks to
-
its map-memorisation feature and the smart back-home function.
- Upon completing a cleaning cycle or when the battery is low, thanks to its TotalSurface
2.0 technology, the robot vacuum cleaner will automatically return to the charging base to
avoid running out of battery. Once the robot has recharged, it will resume cleaning from
the point it has stopped.
Note
If there is no good access to the charging base, the robot vacuum cleaner will not be able to
return to it. If this happens, place it manually on the charging base.
Functions
Pause
- While the robot vacuum cleaner is running, press the Start/Pause button on the robot
vacuum cleaner or select it in the app to pause the cleaning process. Press the Start/Pause
button on the robot vacuum cleaner or on the app to resume the cleaning process.
CONGA 7490 IMMORTAL X-TREME
ENGLISH
55