cecotec CONGA 7490 IMMORTAL X-TREME Manual De Instrucciones página 57

Note:
- If you wish to mop, do not fill the water tank.
To ensure a perfect scrubbing from the start, it is suggested to dampen the mop evenly with
-
water before fixing it to the mixed tank. It is also recommended to wash the mop after every use.
It is recommended to be present when the robot vacuum cleaner is scrubbing.
-
When the robot vacuum cleaner returns to the charging base, you must remove the mop.
-
Do not leave the robot vacuum cleaner charging with the mop assembled.
Manual mode
The robot vacuum cleaner can be moved manually by selecting manual mode in the application
and using the arrow keys.
Back Home mode
Press the Back Home button on the robot vacuum cleaner or select the option in the app to
send the robot vacuum cleaner to the charging base in any cleaning mode. The robot vacuum
cleaner will stop vacuuming until it reaches the base.
Smart Area mode
- Once the home's map has been saved, select this mode for the robot to clean a specific
area in zigzag motion. The robot vacuum cleaner will clean the selected area and then
return directly to the charging base. You can select up to 5 different areas on the map. The
robot vacuum cleaner will only clean the area selected on the map. It will therefore go to
the selected area and return to the base without vacuuming.
- You can select up to two cleaning repetitions for the selected areas. The second cleaning
will be carried out in a vertical zigzag motion.
To activate this mode, select the Smart Area option on the app.
-
Room Mode
Once the map of the house has been saved, select this mode for the robot to clean specific
-
rooms in zigzag motion. Once done cleaning the selected rooms, the robot vacuum cleaner
will directly return to the charging base. The cleaning of the selected rooms will be carried
out based on selection order. The robot vacuum cleaner will only clean the area selected on
the map. It will therefore go to the selected area and return to the base without vacuuming.
To activate this mode, select the Room cleaning option on the app.
-
Spot mode
Select this mode if you want to thoroughly clean a specific point in the map, making the
-
most of the robot vacuum cleaner's maximum power. The robot vacuum cleaner will clean
an area of 1.6m x 1.6m in a zigzag pattern and return directly to the charging base once
finished. The robot vacuum cleaner will only clean the area selected on the map; therefore,
it will go to said area and return to the charging base without vacuuming.
- To activate this mode, select the spot cleaning option on the app.
CONGA 7490 IMMORTAL X-TREME
ENGLISH
57