Table of contents
1
Introduction ........................................................
2
Product description (Fig. 1) ................................
3
Scope of delivery (Fig. 1) ...................................
4
Proper use..........................................................
5
Safety instructions..............................................
6
Technical data....................................................
7
Unpacking ..........................................................
8
Before commissioning........................................
9
Operation ...........................................................
10 Working instructions...........................................
11 Cleaning .............................................................
12 Maintenance.......................................................
13 Storage and transport ........................................
14 Repair & ordering spare parts ............................
15 Disposal and recycling .......................................
16 Warranty conditions - Scheppach 20V IXES
series..................................................................
17 EU Declaration of Conformity.............................
18 Exploded view .................................................... 377
Explanation of the symbols on the
product
Symbols are used in this manual to draw your attention to
potential hazards. The safety symbols and the accompa-
nying explanations must be fully understood. The warn-
ings themselves will not rectify a hazard and cannot re-
place proper accident prevention measures.
Before commissioning, read and observe
the operating manual and safety instruc-
tions!
Attention! Failure to observe the safety signs
and warning information affixed to the prod-
uct and failure to observe the safety and op-
erating manual can result in serious injury or
even death.
Wear a safety helmet with face protection or
safety goggles and hearing protection.
Wear safety gloves!
Wear sturdy footwear!
It is important to wear protective clothing for
hands, forearms, legs and feet.
Do not expose the product to rain. The prod-
uct may only be stationed, stored and oper-
ated in dry ambient conditions.
23
24
24
24
24
27
28
28
30
31
34
34
36
36
37
37
39
1
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear Customer
We hope your new product brings you much enjoyment
and success.
Note:
In accordance with the applicable product liability laws,
the manufacturer of this product assumes no liability for
damage to the product or caused by the product arising
from:
• Improper handling
• Non-compliance with the operating manual
• Repairs carried out by third parties, unauthorised spe-
cialists
• Installing and replacing non-original spare parts
www.scheppach.com
Only for two-handed operation.
Warning! Risk of kick-back.
Beware of the kick-back of the product and
avoid making contact with the rail tip.
Only carry out maintenance, modification,
adjustment and cleaning work when the mo-
tor is switched off and the battery is re-
moved.
Oil tank contents
Weight kg
Guide bar size
Cutting length
Open
Locked
Installation direction of the saw chain
Guaranteed sound power level of the prod-
uct.
Lithium-ion battery
The product complies with the applicable
European directives.
GB | 23