Publicidad
Idiomas disponibles
Idiomas disponibles
SETTING THE SLEEP TIMER
The unit can be turned off automatically
at a specified
time.
Use the remote control.
1
Press the SLEEP button.
2 Within 4
seconds,
press the -4-4
or FF
button
to specify
the time until the power
is turned
off.
Each time the button is pressed,
the time changes
between
10 and 240 minutes
in 10-minute
steps,
Specified
time
To check the time remaining until the power is turned off
Press the SLEEP button once.
The remaining
time is displayed
for 4 seconds.
To cancel the sleep timer
Press the SLEEP
button twice so that "SLEEP
on the display
disappears.
CONNECTING OPTIONAL
EQUIPMENT
Refer to the operating
instructions
of the connected
equ~pment
for details.
The connecting
cords are not supplied,
Obtain the necessary
connecting
cords.
* Consult your local Aiwa dealer for optional
equipment.
VIDEO/AUX JACKS
This unit can input analog sound signals through these jacks.
m
Use a cable with RCA phono plugs to connect
audio equipmel~t
(turntables,
Li3 players,
VCRs, TV, etc.).
Connect
the red plug to the R jack, and the white plug to the L
jack.
When connecting
a turntable
Use an Aiwa turntable equipped with a built-in equalizer amplifier.
CD DIGITAL, OUT (OPTICAL) JACK
This unit can output CD digital sound signals through this jack.
Use an optical cable to connect
digital audio equipment
(digital
amplifier,
DAT deck, MD recorder,
etc.).
Remove the dust cap @ from the CD DIGITAL OUT (OPTICAL)
jack. Then,
connect
an optical
cable plug to the CD DIGITAL
OUT (OPTICAL)
jack.
When the CD DIGITAL OUT (OPTICAL) jack is not being
used
Attach the supplied
dust cap.
SUPER WOOFER d JACK
Connect an optional powered sub woofer with a built-in-amplifier
to the jack.
ENGLISH
20
Publicidad
