Publicidad
Idiomas disponibles
Idiomas disponibles
ENGLISH
Cleaning mineral deposits
-
The descaling warning will occur automatically and will mean that 500 cumulative cycles
have elapsed.
-
All indicator lights will flash rapidly 5 times once preheating is complete. Once descaling
has been completed, the machine will return to its normal state.
1. Fill the water tank with water and a descaling solution up to the MAX level indicated
on the water tank (the scale of water and descaler is 4:1. Follow the instructions on the
package of the descaler.). Instead of a descaler, you can also use a "homemade descaler"
made from citric acid (available in pharmacies or drugstores) by mixing 100 parts of
water with 3 parts citric acid.
2. Place the metal portafilter (with no coffee inside) and the jug.
3. Press the power button once, its red indicator light will light up; press the power button
again and wait for the machine to start heating up.
4. When the power indicator light lights up, heating is complete. Press the coffee button and
prepare two cups of coffee. Then, close the pump and wait 5 seconds.
5. Press the coffee/steam button, the coffee/steam indicator light lights up. Then, wait until
the steam indicator light also lights up. Emit steam for 2 minutes by turning the steam
knob to the steam/hot water position; then, turn the knob back to the off position to stop
generating steam.
6. Press the power button to stop the machine immediately and let the descaler work for 15
minutes.
7. Restart the coffee machine and repeat steps 4 and 5 at least 3 times.
8. Next, press the coffee/steam button, the coffee indicator light will light up. Then, press
the power button to prepare coffee until no descaler is left.
9. Next, prepare coffee (without coffee powder) with tap water at MAX level, and repeat
steps 4 to 6 3 times (no need to wait 15 minutes at step 6).
10. Repeat step 7 at least 3 times to ensure that the steam wand is clean.
11. Follow the procedure below to cancel the descaling warning once it has been completed.
Press and hold the coffee button and the steam button for 3 seconds at the same time
in standby mode, then their corresponding indicator lights will flash rapidly 3 times. This
will mean that the descaling warning has been cancelled and the duty cycle is back to
zero.
44
Publicidad
