cecotec BOLERO AGUAZERO 4101 FULL-BI E Manual De Instrucciones página 102

ENGLISH
Dishes and Incorrect
cutlery are not programme
clean Incorrect basket
loading
1. Very hard
2. Low inlet
There are
stains and 3. Dishwasher
layers of dirt
on glasses and 4. Inadequate
cutlery
5. Empty rinse
6. Incorrect
Combination of
Cloudy soft water and too
glasses much detergent
There is
a yellow- Tea or coffee
brown film stains
on internal
surfaces
Iron deposits in
the water can
cause a film in the
water
BOLERO AGUAZERO 4101 FULL-BI E
102
Select a more powerful programme.
Make sure that the detergent dispenser and spray
arms are not blocked by large dishes.
To remove stains from glassware
water
-
temperature
-
-
overloading
loading.
-
Out-of-
date or wet
-
detergent
powder.
aid dispenser
detergent
dosage
Use less detergent if you have soft water and select a
shorter cycle to wash the items made of glass.
Use a solution of 1/2 cup bleach and 3 cups of warm
water to remove stains.
WARNING
You have to wait 20 minutes after a cycle to let the
heating elements cool down before cleaning the
inside, otherwise it will burn.
It is recommended to install a special filter to descale
your water supply.
Remove all metal utensils from the dishwasher.
Do not add detergent.
Choose the longest cycle.
Start the dishwasher and let it run for 18 to 22
minutes. The main wash should then be carried
out.
Open the door to pour 2 cups of white vinegar into
the bottom of the dishwasher.
Close the door and let the dishwasher finish the
cycle. If vinegar does not work repeat the above
procedure but use 1/4 cup (60 ml) citric acid
instead of vinegar.