Safety Instructions; Electrical Safety - Teka HLC 844 Instalación Y Mantenimiento

SAFETY INSTRUCTIONS

Read these instructions carefully to obtain the best perfor-
mance from your oven, safely and correctly. Keep this manual
so that it can be read by a new owner.

Electrical safety

• In order to connect the oven to the mains, the technician
should use an H05RR-F, H05SS-F or H07RN-F power cable.
The connection diagram is shown in Figure 1.
• The oven must always be plugged into a sound earth con-
nection and its installation must comply with current regula-
tions.
• When installing the oven, total disconnection means must
be incorporated into the fixed installation in accordance
with the installation regulations (adapted to the current to
be supported and with a minimum space between the con-
tacts of 3 mm) based on surge protection category III con-
ditions, for disconnection in the event of an emergency and
when cleaning or changing the bulb. Under no circumstanc-
es must the earth wire pass through this switch.
• This switch may be replaced by a plug, provided it is acces-
sible for normal use.
• Any handling or repair to the appliance, including replace-
ment of the power cable, should be carried out by author-
ised Technical Service Personnel using original spare parts.
Repairs or handling by others may damage the appliance or
cause malfunctioning that could be hazardous to your safety.
• Unplug your oven if it malfunctions.
• In combined ovens with countertops and to avoid potential
risks, only those recommended by the manufacturer may be
assembled.
English
Installation & Maintenance
29