Publicidad
Idiomas disponibles
Idiomas disponibles
INSTALLATION GUIDELINES
ASSEMBLY INSTRUCTIONS
1. Measure the height at where the cabinet will be located, as illustrated. It is
recommended to leave at least 8" (203 mm) clearance between the wall and
the cabinet to ensure the full opening of the door.
2.
Plus 17 3/4" (450mm) to the height, this calculated measure is the distance
of the bottom of the support bar to the floor, as illustrated below. Mark the
bottom position of the support bar on the wall.
When installing this product, the screws should
reach the wood studs behind the plasterboard wall.
It is not reccommended to install on a platerboard
wall if the screws and anchors are not secured in
the wood studs.
1
2
D
Support bar
PAGE 6
Publicidad
