Allen + Roth RIAN WC-WW 5288439 Manual Del Usuario página 8

ASSEMBLY INSTRUCTIONS
6.
Replace and secure the support bar with screws (BB).
7.
Gently hang the cabinet on the support bar.
8.
Open the door, measure and mark two holes, one of the holes must be
right over the wall studs (previously identified) respectively from the back
of the cabinet. Make sure the two holes avoid the existing screws behind
the cabinet at the indicated locations as shown below. The cabinet could be
moved horizontally before it is secured, so If the existing screws happen to be
located over the studs, move the cabinet left or right a bit to avoid the existing
screws overlap with the two holes to be drilled.
6
7
8
4 3/4"
9 1/2"
120mm
241mm
BB
4 3/4" 9 1/2" 4 3/4"
120mm 241mm 120mm
PAGE 8