Samsung SmartThings Station Manual Del Usuario página 15

Configuring the SmartThings Station
Wi-Fi
You can check the information of the Wi-Fi network connected to the SmartThings
Station or change to another Wi-Fi network.
Device firmware updates
Update the software of your mobile device connected to the SmartThings Station via the
firmware over-the-air (FOTA) service. You can also change the update settings.
Zigbee secure mode
Set to automatically reconnect only high-security devices to the SmartThings Station
when disconnecting the devices using the Zigbee communication method. If you tap
the Zigbee secure mode switch to deactivate it, the low-security devices will also be
automatically reconnected to the SmartThings Station.
Hub status light
Set the hub indicator light to appear blue when using the SmartThings Station as a
SmartThings hub.
You can also turn off the hub status light of the SmartThings Station by pressing the
Hub status light switch to deactivate it.
How to use
You can learn about how to use the SmartThings Station.
1
On your mobile device, launch the SmartThings app and tap Devices.
2
Tap the SmartThings Station card.
3
Tap → How to use.
English
15
13