Publicidad
Idiomas disponibles
Idiomas disponibles
Basic safety guidelines
Security symbols
DANGER
This symbol indicates that there is a potential imminent danger to physical integrity and life. Failure to observe
the instructions can lead to serious harmful e ects causing possible injury with danger of death.
WARNING
This symbol indicates that there is a potential imminent danger to physical integrity and life. Failure to observe
the instructions can lead to damage to the machine and to the user.
INFORMATION
This symbol indicates that suggestions and especially practical information can be found below. This symbol
indicates suggestions and practical information. Ignoring this advice could result in misuse of the machine.
User safety
+
The material that is fed to the stainless steel grid of the machine must only be damp herbaceous and/or semi-woody plants.
Other materials could cause damage to the machine and injure the user.
+
Always wear gloves and safety goggles when using the machine and avoid wearing loose clothing.
+
Keep hands and hard objects away from the blade.
+
Keep your eyes away from the stainless steel grid while the machine is operating, as splinters could y out (always wear safety
goggles).
Only use the machine if it is in perfect condition, otherwise there are potential risks of injury to the user.
+
+
Safety devices (switches, stainless steel grid, racks, etc.) must not be dismantled under any circumstances.
+
Make sure that the top and side covers are securely closed before performing the maintenance before performing the mainte-
nance.
Intended users of the MT Tumbler 200
Master Products machines must only be used by an adult who has read and understood the instruction manual.
How to switch o the MT Tumbler 200
Master Products machines must always be stopped by using the o switch (red).
The stainless steel grid detector will stop the machine when triggered, but this safety function should never be used routinely to
stop the machine.
Before performing any maintenance on the machine you must disconnect it from the mains electricity supply.
Disclaimers
Modi cations on Master Products machines without the approval of the manufacturer are forbidden.
The manufacturer withdraws the warranty from any modi ed machine and does not accept liability for any failures and accidents
that may result.
The manufacturer withdraws the warranty from any modi ed machine and does not accept liability for any failures and accidents
that may result.
During the warranty period, Master Products machines may only be dismantled and repaired by the manufacturer's engineers or
o cial representatives.
The operator using the machine must check that processed materials are regularly removed. Anything left behind could become
an obstruction and therefore cause the machine to malfunction.
16
Publicidad
