Master MT Tumbler 200 Manual De Uso Y Mantenimiento página 18

Attach the input hopper (C) on the trimmer (A), holding
3
the hopper over the trimmer and tting it into the two
positioners.
To open the arms, pull them up and turn them 90°.
5
Then t the leaf collector bag (G) by sliding the tapes
over the leaf collector arms.
Push the buttons to start the barrel and the blade. Set the speed you want to use (if you have the adjustable model).
7
18
ON BLADES
ON TUMBLER
OFF TUMBLER
Place the belt seal (E) on the leaf collector tube
4
between the trimmer (A) and the leaf collector (B).
Connect the leaf collector (B) and the trimmer (A) to
6
a power source (230 V/50 Hz single phase). Read the
checks that must be performed before connecting.
OFF BLADES