JVC HR-S8007UM Manual De Instrucciones página 55

4
Set date
On the front panel:
Press CH 5∞ to set the date, then press OK.
On the Remote:
Press %fi to set the date, then press OK or #.
● Press and hold either button to change the date
by 15 days.
5
Set year
On the front panel:
Press CH 5∞ to set the year.
On the Remote:
press %fi to set the year.
6
Start auto channel set
Press MENU.
● Receivable channels in
your area are
automatically assigned
to the CH 5 ∞ buttons,
and non-receivable
channels are skipped.
● If the tuner channels have been set properly
"SCAN COMPLETED" will be displayed on the
screen. If "NO SIGNAL" is displayed on the
screen, make sure that the antenna cable is
connected to the VCR properly and press OK on
the front panel or
will try Auto Channel Set again.
7
Return to normal screen
Press MENU.
Downloaded from: https://www.usersmanualguide.com/
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END
on the Remote. The VCR
#
7
EN