Publicidad
Idiomas disponibles
Idiomas disponibles
Cable Box
Brand Setting
2
–1 3
CABLE
/SAT
1
CABLE BOX BRAND NAME
ARCHER
CABLETENNA
CABLEVIEW
CITIZEN
CURTIS
DIAMOND
GC BRAND
GEMINI
GENERAL INSTRUMENTS
HAMLIN
JASCO
JERROLD
LG/GOLDSTAR
NOVAVISION
OAK
PANASONIC
PULSER
RCA
REGAL
REMBRANDT
SAMSUNG
SCIENTIFIC ATLANTA
SIGMA
SL MARX
SPRUCER
STARGATE
TAIHAN (DEHAN)
TELEVIEW
TOCOM
UNIKA
UNIVERSAL
VIDEOWAY
ZENITH
Downloaded from:
https://www.usersmanualguide.com/
1
2
3
2
2
4
5
6
Number
8
9
7
4
0
2
ENTER
TV PR +/–
BRAND CODE
01, 05, 17
01, 17
15, 16, 17
15, 16, 17
02
01, 17
15, 16, 17
15
01, 04, 06, 11, 12, 15
10, 18, 23
15
01, 04, 06, 11, 12, 15
26
02
07
13, 14
15, 16, 17
13, 14
10, 18
01, 16, 17
05, 16, 24
02
07
05, 16, 17, 24
13, 14
05, 15, 16, 17, 24
27
05, 16, 24
01, 04, 16
01, 17
16, 17
03, 09
03, 09
This Remote can control some functions of the cable
boxes listed below. Some cable box brands have more
than one code. If your cable box does not function with
a specified code, try other codes.
1
Turn on the cable box
Turn on the cable box using the Power button on
the cable box or its Remote.
2
Enter cable box brand code
Follow the example shown below.
1 Press and hold CABLE/SAT.
2 Press the Number keys to enter your cable
–2
3 Press OK, and release CABLE/SAT.
● Once you have set the Remote to operate the
cable box, you do not have to set it until you
replace the batteries from the Remote.
3
Operate cable box
–3
First, press CABLE/SAT to set the Remote to Cable
Box mode, then press one of the following
buttons:
● For some brands, you must press ENTER after
having pressed the Number keys to enter a
channel number.
● To change the cable box's channels, press
TV PR +/– or the Number keys.
NOTES:
● Depending on the type of cable box, some or all functions
cannot be operated using this Remote.
● It's not possible to operate a cable box not equipped with a
remote sensor.
● It's not possible to set the Remote for both your cable box and
a DBS receiver at the same time. You can only set the Remote
to operate one of these units at a time.
● You have to subscribe to a cable service to receive cable
channels.
(Ex.) To set the Remote to RCA 14:
CABLE
/SAT
Hold
down
ATTENTION
The remote control can operate not only the video recorder but
also some of your TV, cable box and DBS receiver.
● To operate your video recorder, first press the VCR button to
set the remote control to the Video mode.
● To operate your TV, first press the TV button to set the
remote control to the TV mode. (
● To operate your cable box or DBS receiver, first press the
CABLE/SAT button to set the remote control to the cable box
or DBS receiver mode. (
box's brand code by referring to the table
below.
The cable box should turn off. If it does, try
other operations below (
, TV PR +/–, and Number keys.
1
4
Press in succession
pg. 38)
pg. 39, 40)
39
EN
step 3).
Release
Publicidad
