Olymp LavaSit SPLENDOR ErgoActive Shiatsu Instrucciones De Servicio página 9

2. Comfort Chair
Chair with Electro-Motor Driven Leg Rest and Shiatsu Massage Function
• What is a shiatsu massage?
> A combination of far eastern medicinal massage and western anatomic-physiological treatment
using finger pressure
• What good is shiatsu?
> Bodily tension and indurations can be dissipated
> Stress symptoms and their consequences can be relieved
> Vitalisation of the organism, bodily self-healing can be activated
> A state of relaxation can be achieved
• How does the shiatsu massage function work?
> A massage module is integrated in the backrest of the chair
> Moving rollers apply manual pressure on the back through the upholstery
> Vertical movement reaches the customers' upper and lower back sections
• Medical Warnings:
> Pregnant women, sick persons and children should not use the shiatsu massage.
> If injury to the spine exists or after operations the massage can be dangerous.
In case of uncertainty ask your doctor's advice beforehand.
> Massage should never give an unpleasant feeling. Excessive massages can be harmful for your
body. If you get an unpleasant feeling break off the massage immediately.
> The shiatsu massage function cannot replace physiotherapy.
•
We recommend use of the seat cushion for customers who are less than about 155 cm tall.
•
You can control the leg rest as well as the massage function using the multi-button remote control
(Fig. 9)
as follows
A When the control lamp „On" (A) lights up green, your system is under power and ready
for use.
B Use the button combination (B) for extending and lowering the leg rest
With button  you raise the leg rest progressively.
With button  you lower the leg rest progressively.
The leg rest stops automatically at the end position.
> We recommend first extending the leg rest and then turn on the massage.
> If you switch on the massage first, the leg rest can be extended only after about 4 seconds
due to the system.
C Use the „Prog." (C) button for the massage programme:
Press button 1x
Press button 2x
Press button 3x
Press button 4x
Press button 5x
:
= Programme 1 „Energy":
> powerful massage over the whole back
> control lamp „Energy" (E) lights up:
= Programme 2 „Dream":
> light massage over the whole back
> control lamp „Dream" (F) lights up
= Programme 3 „Relax":
> medium strength massage over the whole back
> control lamp „Relax" (G) lights up
= Programme 4 „Backflex":
> stretching of the lumbar vertebrae only
> control lamp „Backflex" (H) lights up
= return to programme 1
GB
2
(Fig. 2
)