Lavorwash SW 2600 BT Manual De Instrucciones página 32

IT IS DUTY OF THE USER TO ENSURE THAT THE WASTE PACKAGING IS DISPOSED OF
AND DESTROYED ACCORDING TO THE SPECIFIC REGULATIONS.
ASSEMBLING THE SIDE BRUSH:
1)
Take the side brush Detail 2 Fig. 2 out of the bin Detail A Fig. 1
2) Unscrew and remove the three bolts Detail 1 Fig. 1; assemble the brush so that the three pins fit into the holes
Detail 3 Fig. 2
3)
Replace the three bolts Detail 1 and screw on tightly to block the brush.
4) Once assembled, the side brush makes contact with Detail 2 Fig. 2 blocking the pulley where to place the elastic belt
Detail 5 Fig. 1
5)
Pull the belt Detail 5 forwards and fit it into the plastic pulley Detail 4.
6)
Unscrew the screws Detail 6: the purpose of these screws is to keep the belt taut while assembling the brush. Once
the brush has been assembled these screws are no more needed.
7)
Secure the cover Detail 1 Fig. 3 using the three screws Detail 2 Fig. 3.
CHAPTER 4 - PERMITTED ENVIRONMENTAL CONDITIONS
FOR THE ENDOTHERMIC VERSIONS:
MINIMUM WORKING TEMPERATURE
FOR THE ELECTRIC VERSIONS:
MINIMUM WORKING TEMPERATURE
IMPORTANT: Do not use or leave parked with temperatures above +45° C (+113° F).
CHAPTER 5 – PERMITTED AND FORBIDDEN USES
PERMITTED USES:
The SWL 700/900 – SW 2600/SW 3700 sweeping machines are designed for cleaning ground surfaces under the following
conditions: types of material to be swept up from ground: machining residues, dust, grit, dirt in general; types and features
of working surfaces (ground): hard, flat and compact surfaces such as: asphalt, concrete, wood surfaces, metallic surfaces,
ceramics, marble, smooth or rusticated plastic materials fibre or synthetic (to avoid electrostatic charges on these surfaces,
natural fibre brushes are essential.) cut moquette; type of environment: closed environments (electric versions), open
environments (endothermic versions).
FORBIDDEN USES:
SWL 700/900 – SW 2600/SW 3700 sweeping machines must not be used under the following conditions:
For gathering up oils, toxic dust or materials and chemical in general (specific authorisation must be requested from
the manufacturer or supplier if the machine is to used in chemical plants or in environments where toxic waste is to be
removed from the floors).
The machine must not be used for collecting filiform materials (for example, waste threads from textile
production, or long chips from mechanical machining) since material in this form would be incompatible
mechanical rotary action of the central brush.
Sweeping up lighted cigarette butts or any other object which could cause the combustion of the deposits in the
container or filter cartridges.
The machine must not be used for clearing snow, for washing any type of surface or for use on particularly wet or
damp surfaces.
The machine must not be used on surfaces with a gradient of more than 2 %.
The machine must not be used on surfaces which are particularly loose, broken up or gravely.
The machine must not be used in the presence of explosive or inflammable materials (in these circumstances machines
bearing FLP certificates must be used).
The machine must not be used on public highways as it is not equipped for highway homologation.
The machine must not be used in badly lit environments unless fitted with their own lighting unit.
The endothermic version of the machine (with an internal combustion engine) must not be used in enclosed
environments since the exhaust fumes from the motor contain carbon monoxide, a lethal odourless gas.
The machine must not be towed or used for towing anything.
The machine must not be used as a raised surface or resting surface for persons or objects.
MAXIMUM WORKING TEMPERATURE
MAXIMUM WORKING TEMPERATURE
- 28° C
+ 38° C (+ 100° F)
- 20° C
+ 40° C (+ 104° F)
Pag. 32
(- 18,4° F)
(- 4° F)
with the