cecotec FORCECLIMA 9500 Soundless Heating Connected Manual página 34

ENGLISH
NOTE:
- Move the device carefully, so as not to spill the water in the water tank at the bottom of
the body.
- Keep the drain cap and the water plug properly.
- During drainage, the body can be tilted slightly backwards.
- If the water container cannot hold all the water, before the water container is full, stuff the
water outlet with the water plug as soon as possible to prevent water from flowing to the
floor or the carpet.
- When the water is discharged, re-tighten the water plug and tighten the drain cap.
- Restart the appliance after the plug and cap are installed, otherwise condensed water of
the appliance will flow to the floor or the carpet.
Continuous drainage. Fig. 11
1. Unscrew the drain cap and unplug the water plug.
2. Set the drainage pipe into the water outlet.
3. Connect the drainage hose to a bucket or big container.
Protection features:
Frost protection function
In cooling and dehumidification modes, if the temperature of the evaporator outlet pipe is
too low, the appliance will automatically enter protection mode to prevent damage to the
evaporator. The appliance will restart when the temperature is restored to normal values.
Condensate water flooding protection function
When the water level exceeds the maximum level allowed by the safety buoy, the appliance
will switch off and activate the FULL indicator on the control panel. To restart the device, the
water inside the device will need to be drained through the bottom drain plug (shown in detail
in the drainage instructions section). Once the water has been drained, the device will restart.
Automatic defrost
This air conditioner has an automatic defrost function.
Compressor protection function
To increase the service life of the compressor, it has a 3-minute delay booting protection
function after the compressor is turned off.
5. WI-FI CONNECTIVITY AND MOBILE APP
In order to link your product with our App, please follow the steps below.
1. Download Cecotec's app from Google Play or App Store.
66 FORCECLIMA 9500 SOUNDLESS HEATING CONNECTED
2. If it is the first time you use it, register an account. If not, log in.
3. Once you have entered the App, press "+" on the top right-hand corner and tap "ForceClima
Connected".
Turn on your device, you must make sure that you do not have any mode selected by
4.
pressing the power button, the air conditioner will go into standby mode. Then press the
Wi-Fi button for about 5 seconds, the Wi-Fi indicator will start blinking. If the indicator
blinks slowly, this operation must be repeated.
Enter your Wi-Fi password and press confirm. Remember the Wi-Fi network must be 2.4
5.
GHz.
6. Then, pairing will start automatically.
In the event that automatic pairing fails, turn on your device, you must ensure that you do
not have any mode selected for this press the power button, the air conditioner will go into
standby mode, then press the button for approximately 5 seconds, the Wi-Fi indicator will
start flashing. And follow the steps below:
Once you have entered the App, press "+" on the top right-hand corner and tap "ForceClima
1.
Connected".
2. A window will open to confirm that the Wi-Fi icon is blinking. If so, tap on "Confirm
indicator slowly blink".
Next, a window will open asking for the Wi-Fi user name and password (remember your
3.
Wi-Fi network must be of 2.4 GHz). Once you have entered your password and user name,
tap on "Next".
4. On the next screen, you will have to select the pairing mode. Tap on "AP Mode" and a
mode-selection menu will open.
5. Select AP mode. Next, confirm the appliance light is flashing (tap on "Confirm indicator
slowly blink") and tap on "Next".
6. Another screen will open, telling you to connect to the appliance Wi-Fi appearing as
"SmartLife-XXXX". Tap "Go to connect" and the application will open your mobile-device
Wi-Fi network menu. Connect to the previously mentioned network and wait for both
devices to connect.
7. Once connected, return to the App and pairing will begin.
Wait for it to finish and you will be able to use your appliance via the App.
8.
6. CLEANING AND MAINTENANCE
- Turn off and unplug the device from the power supply before cleaning or repairing it.
- Use a soft, dry (or slightly damp) cloth with some neutral cleaning agent to clean the
product's outside and prevent the accumulation of dust and dirt.
- If the product is not going to be used for a long time, store it in a safe and well-ventilated
place.
- Do not use detergent, scouring pads, chemically-treated cloths, petrol, benzene, alcohol,
ENGLISH
FORCECLIMA 9500 SOUNDLESS HEATING CONNECTED 67