Babyauto Dadou LB 383 Manual De Uso página 21

2. SEAT PARTS AND FITTINGS
A. Harness strap slot.
B. Harness pads.
C. Harness straps.
D. Buckle release-button.
E. Buckle pad.
F. Harness adjustment button.
G. Child seat gradient adjuster.
H. Abdominal belt hook Group 1.
I. Abdominal belt hook Group 0+.
J. Diagonal belt hook Group 0+ & 1.
K. Diagonal belt hook Group 0+ & 1.
L. Cover.
M. Group 0+ angle adjustment lever.
3. INSTALLING CHILD SEAT. GROUP 0+.
WARNING
Do not use the child seat on a passenger seat fitted with an active
airbag.
1. Recline the seat as posible. To adjust the reclining position of the
child seat, pull the red handle
position (3.1 & 3.2).
2. Rotate adjustment lever
3. Install the child seat rearward facing (3.5).
4. Pull and pass seat belt through two waist belt guides
the sides of the base of the child seat, pass the vertical belt through
the K guides and finally secure in the
5. Fasten the seat belt into the vehicle´s buckle until it "clicks", making
sure the child seat is properly installed (3.10).
Group 0+/1
Only suitable for Group 0+, approx.
0 to 9 months (0-10 Kg.)
G forward until you reach the required
M until it is fully extended (3.3 & 3.4).
J guide (3.6, 3.7, 3.8 & 3.9).
I located to
www.babyauto.com
EN
21