Babyauto Dadou LB 383 Manual De Uso página 22

4. INSTALLING CHILD SEAT. GROUP 1.
WARNING
Installing the child seat forward facing (Group 1) can only be maid if the
child is more than 9 kg.
1. To install a Group 1 seat, you must first remove the padding for
Group 0+.
2. The seat must be in its most upright position to adjust reclining
angle of the child seat, pull the control red handle
until the desired position is achieved (4.1 & 4.2).
3. If you have used the seat as a Group 0+, be sure to place the
adjustment lever
4. Fit this child seat into the vehicle´s seat, making sure it is firmly
pressed against the vehicle seat backrest (4.5).
5. Pull the seat belt and direct the diagonal portion and the waist belt
between the base and the structure of the child seat, passing the
waist belt through the
K and J guides (4.6).
6. Make sure the waist portion goes through the
between the seat and the back and the diagonal shoulder belt
passes through the
7. Secure the diagonal shoulder belt passing it through the
guide (4.9).
8. Insert the vehicle safety belt in the vehicle anchor point. You will
hear a "click" when properly installed.
22 Child restraint system
Only suitable for Group 1, approx.
9 months to 4 years of age (9-18 Kg.)
M in position for Group 1 (4.3 & 4.4).
H guides and the diagonal belt through the
K guides (4.7 & 4.8).
G towards you
H guides located
J metal
DADOU