Descargar Imprimir esta página

Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 17

Ocultar thumbs Ver también para Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

5. Press the A or V pad to scroll through the stir-charting
settings.
CL-H (Cban - Heavy SoE 4 hours:}
CL-M (Cban - Medium SoE 3 hours:}
CL-L (Cban - Light SoE 2 hours:}
Choosing the soii bvd of the oven automatically programs
the sdf-cbaning
time.
6. After four seconds, CLEAN, DELAY and LOCK will appear
in the dispiay to show that the oven is set for a ddayed
dean operation. The deiay time is dispiayed.
During
the Self-Clean
Cycle
When LOCK shows in the dispiay, the door cannot be opened.
To prevent damage to the door, do not force the door open
when LOCK is dispiayed.
Smoke
and Sin!!ms
You may see some smoke and smell an odor the first few
times the oven is cleaned. This is normal and will lessen in
time.
Smoke may also occur if the oven is heavily soiled or if a
broiler pan was left in the oven.
Sounds
As the oven heats, you may hear sounds of metal parts
expanding and contracting. This is normal and will not
damage the oven.
Jf the oven
has already
been
set for a clean
cycle
and you wish
to set a
delay:
1. Press the Delay pad.
° DELAY flashes.
Delay
° 00:00 will appear in the display.
2. Press the A or _' pad to set the amount of time you want
to delay the cycle.
After four seconds, CLEAN, DELAY and LOCK will appear
in the display to show that the oven is set for a ddayed
dean operation. The dday time is displayed.
When the Self-Clean
cycle starLs:
° DELAY will turn off.
° The clean time will appear in the display.
To cancel
the Self-Clean
cycle:
Press the Cancel pad.
/Cancel/
° All words disappear from the display.
° All functions are canceled.
° The time of day appears in the display.
After
Serf-Cleaning
About one hour after the end of the self-dean cycle, LOCK
will turn off. The door can then be opened.
Some soil may leave a light gray, powdery ash. Remove
it with a damp cloth. If soil remains after wiping, that means
the clean cycle was not long enough. The soil will be re-
moved during the next clean cycb.
if oven racks were left in the oven and do not slide
smoothly after a clean cycle, wipe racks and rack supports
with a small amount of vegetable oil to make them easier to
move.
Fine lines may appear in the porcelain
because it went
throagh heating and cooling.
This is normal and wiii not
affect performance.
A white discoloration
may appear after cleaning if acidic
or sugary foods were not wiped up before the self=clean
cycle. This discoloration is normal and will not affect perfor-
mance.
If the oven door is left open, "door" wiii flash in the
display and a signal will beep until the door is closed
and the Clean pad is pressed again.
If more than five seconds elapse between pressing the
Clean pad and the A or V pad, the program will
automatically return to the previous display.
The oven door will be damaged if the oven door is
forced to open when LOCK is still displayed.
16

Publicidad

loading