Descargar Imprimir esta página

Amana Easy Touch Control 500 Guía De Uso Y Cuidado página 20

Ocultar thumbs Ver también para Easy Touch Control 500:

Publicidad

Idiomas disponibles

Idiomas disponibles

Oven Door
oven door, This could cause the range to tip over, break
the d0ar, 0r k_Jure the user.
Note: The oven door on a new range may feel "spongy"
when it is closed. This is normal and wiil decrease with use.
Oven Window
To protect
the oven
door
window:
1. Do not use abrasive cleaning agents such as steel wool
scouring pads or powdered cleansers as they may scratch
the glass=
2. Do not hit the glass with pots, pans, furniture, toys, or other
objects.
3. Do not close the oven door until the oven racks are in
place.
Scratching, hitting, jarring or stressing the glass may weaken
its structure causing an increased risk of breakage at a later
date.
Leveling
Legs
[eye!!ng legs to the f!oor. This bracket prevents the range
from accidentally tipping.
Emectrical Connection
Appliances
which require electrical
power
are equipped with a three=prong
grounding
plug which must be plugged
directly into a properly grounded three-
hole 120 volt electrical outieL
A/ways disconnect power to appliance before servicing.
The three-prong grounding plug offers protection against
shock hazards. DO NOT CUT OR REMOVE THE THIRD
GROUNDING PRONG FROM THE POWER CORD PLUG.
If an ungrounded,
two-hole
or other type electrical
outlet is
encountered,
it is the personal
responsibility
of the
appliance
owner
to have the outlet
replaced
with
a
properly
grounded
three-hole
electrical
outlet.
Oven Light
- AHow oven to cool before repiadng light bulb.
- Make sure bulb cover and bulb are cool before touching.
To replace
oven light bulb:
1=When oven is coo[, hold bulb cover
BuLscovER
in place, then slide wire retainer
off cover. NOTE: Bulb cover
will fall if not held in place
while removing wire retainer=
2. Remove bulb cover and light
RETAINER
bulb=
3= Replace with a 40-watt appliance bulb=
4= Replace bulb cover and secure with wire retainer=
5= Reconnect power to range. Reset clock=
19

Publicidad

loading