Publicidad
Idiomas disponibles
Idiomas disponibles
REMOTE CONTROL
MUTE function
MUTE
MUTE
1.
Press
button to active this function,
and
will appears on the remote display.
Do it again to deactivate
2. When the MUTE function runs, the remote
controller will display the auto fan speed, and
the indoor unit will operate at lowest fan
speed to be quiet feeling.
3.
When press FAN/ TURBO button, the
MUTE function will be cancel. MUTE function
can not be activated under dry mode.
SLEEP function
Pre‐setting automatic operating
SLEEP
program.
Press
button to activate the SLEEP
SLEEP
function, and
appears on the display.
Press again to cancel
this function.
After 10 hours running in sleep mode, the air
conditioner will change to the previous setting
mode.
I FEEL function
I FEEL
I FEEL
Press
button to active the function, the
will appear on the remote display.
Do it again to deactivate
This function enables the remote control to
measure the temperature at its current location,
and send this signal to the air conditioner to
optimize the temperature around you and ensure
the comfort.
this function.
this function.
EN - 19
ECO function
In this mode the appliance
ECO
automatically sets the operation to
save energy.
Press the
button, the
ECO
display, and the appliance will run in ECO mode.
Press again to cancel it.
Note: The ECO function is available in both
COOLING and HEATING modes.
DISPLAY function (Indoor display)
Switch ON/OFF the LED display on
DISPLAY
panel.
DISPLAY
Press
button to switch off the LED
display on the panel. Press again to switch on the
LED display.
Reset Wi‐Fi
Pressing the ECO button 6 times activates the "Wifi"
function, the display shows "AP" waiting for
connection with the device.
To view the wifi user manual, frame
the QR CODE.
11
appears on the
WIFI
Publicidad
