Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Before using the product
IMPORTANT!
•
This speaker contains a non-replaceable battery.
•
Before plugging in and starting the unit, make sure that all controls are turned
off or set to a low level.
•
If the speaker is not performing correctly, this may be because the battery is
too low and needs recharging.
Charging the speaker
•
The battery indicator icon
•
The charging indicator light above the charging socket displays red when the unit is
charging and changes to green when the battery is full.
•
The battery takes approximately 6 hours to fully charge, which provides about 6 hours
of use at 50% of the volume (level 15) or about 1.5 hours when at full volume (level 30).
•
A sound prompt will alert you when the battery is low.
Inserting the remote control battery
1.
Press the lever downwards in the direction of the arrow on the battery compartment
cover and then lift it off.
2.
Insert 2 x 1.5V AAA batteries into the battery compartment ensuring you follow the polarity
(+ and -) as shown.
3.
Replace the battery compartment cover making sure it clicks firmly back into place.
Connections
Connect your device to the speaker using the cables and sockets/slots detailed below:
Device
Connection
Use a microphone cable with a 6.35mm
Microphone
plug (not provided).
Phone, iPad or
tablet
Use an AUX input cable with 3.5mm plug
CD/DVD player
(not provided). The other end of the
MP3 player
cable must fit your audio device.
Record player
TV
USB memory
Plug in your USB memory stick to play
stick
MP3/WMA/WAV files.
(on the screen) shows the battery level.
28
EN
Speaker Socket/Slot
MIC1 / MIC2
AUX
USB
Publicidad
