Publicidad
Idiomas disponibles
Idiomas disponibles
B
Product usage
Connecting two speakers (TWS)
You can connect one EDENWOOD PARTY 250 BARREL speaker to another EDENWOOD PARTY
250 BARREL speaker via a Bluetooth connection.
1.
Place the speakers near to each other. The speakers must be within 10 metres when
using the TWS function.
2.
Turn on both speakers and make sure they are in Bluetooth mode (BLUE will show on
the screen).
3.
Press and hold the
appear animated on the screen. The speakers will enter TWS mode.
4.
When they are successfully connected, a sound prompt will play, BLUE will continue to
display animatedly.
5.
Connect the external Bluetooth device through its Bluetooth settings to the speakers.
Choose the pairing name of the master speaker. When the Bluetooth is connected, a sound
prompt will play, and you can now play music through both speakers.
6.
Press and hold the
NOTE:
•
If you change the music source, the TWS function will be disconnected.
•
If you want to make a TWS connection with a different EDENWOOD PARTY
250 BARREL speaker, remove previous connections before attempting to
connect the new speaker.
Operation
WARNING! Before plugging in and starting the speaker system, make sure that
all controls are turned off or set to a low level.
NOTE:
•
You can use the speaker while it is charging but if the battery is too low the
speaker performance might be poor. Using a low volume setting will help to
improve the sound.
•
To ensure excellent sound quality, we recommend that you disconnect the
charging cable from the speaker once charging is complete.
Playing music
1.
Plug the AC adapter into the speaker's DC 9V socket and insert the plug into the wall socket.
2.
Press the POWER switch to the on position (I) to turn on the speaker. A sound prompt will
play, the disco lights will turn on and HiFi will briefly display.
button on one speaker to make it the master speaker. BLUE will
button on either speaker to exit TWS mode.
30
EN
Publicidad
