Edenwood BARREL 250 Instrucciones De Uso página 33

B
Product usage
NOTE: If the unit is not used for 10 minutes, it will go into standby mode and the
blue LED lights will turn off. Press the POWER switch on the speaker to the off
position (0) and then to the on position (I) to restart the unit. You cannot use the
remote control to turn the unit on or off.
3. Connect to your audio source as described in the Connections section.
4. To select the playback source, press the
USB, TF or FM.
NOTE:
• TF and USB will only display when these audio sources are plugged in. When
you connect a USB memory stick or TF/SD card, the speaker will immediately
enter this mode and start to play the music.
• When you play the TF/SD card or USB memory stick, the folder/track number
and then the track play time will display.
• Make sure the volume is turned up on both the speaker and the external
device it is connected to.
5. To control playback of the audio, you can either use your external device's controls (if
available), or you can use the following buttons on the speaker:
Button Mode
VOLUME All modes
BT/USB/TF
AUX
BT/USB/TF/FM
BT/USB/TF/FM
ECHO/BASS/
All modes
TREBLE
USB/TF
button repeatedly to select BLUE (BT), AUX,
Action
Turn the knob clockwise to increase the volume
and anticlockwise to decrease the volume.
Press to play or pause (PAUS) the track or file.
Press to mute or unmute the sound.
Press to go to the previous track, file or station
(channel).
Press to go to the next track, file or station
(channel).
Turn the knob clockwise to increase or
anticlockwise to decrease the relevant sound
effect.
Press repeatedly to repeat a single song or
repeat all songs:
• ONE – repeats a single file or track.
• ALL – plays all files or tracks in the order they
are stored.
• OFF – turns off the repeat function.
31 EN