Descargar Imprimir esta página

Edenwood BARREL 250 Instrucciones De Uso página 34

Publicidad

Idiomas disponibles

Idiomas disponibles

B
Product usage
NOTE: AUX playback can only be controlled by the external device such as your
mobile phone or tablet unless the function is specified in the table above.
6.
To turn off the speaker, press the POWER switch to the off position (O).
Operating the remote control
WARNING!
Make sure there are no obstacles between the remote control and the unit's
infrared sensor.
Do not expose the infrared remote sensor to direct sunlight or other strong
light, such as a florescent light.
The remote control gives you the flexibility to playback music remotely. For information on the
various functions and how to operate these controls, please refer to the table in the Product
overview – Parts section of this manual.
Point the remote control up to 5 metres away from the unit and aim it at the remote control
sensor on the front of the unit. The range may vary depending on the brightness of the room.
NOTE: The following buttons are only available on the remote control:
1.
The mute button.
2.
The LED button.
3.
The record button.
REC
4.
The record playback button.
REC
PL AY
5.
0-9 The numeric keypad buttons.
Recording music
Plug in a USB memory stick or TF/SD card into the speaker or if already inserted, press
the
button to select USB or TF mode.
Connect a microphone and then press the
The recording time displays when you are recording.
Press the
button to stop recording and automatically playback the recorded sound.
REC
PL AY
The recordings are saved on the USB memory stick or TF/SD card.
FM Radio
Press the
button repeatedly to select the FM radio mode. The frequency will display
on the screen, for example 91.4.
Press and hold the
(channel) will show on the display, for example P 01.
Once the stations (channels) have been saved, in FM radio mode, press
to the next or previous station (channel).
NOTE: The number of stored stations (channels) depends on the reception in
your area.
REC
button to automatically scan. The number of the stored station
SCAN
32
button on the remote control to start recording.
EN
or
to skip
CH-
CH+

Publicidad

loading

Este manual también es adecuado para:

975742