Joerns Oxford Mini Manual De Instrucciones página 8

Oxford
®
Classic Lifts
Electric Models Only:
6. Clip the battery onto the control box and ensure the red emergency stop button, located
on the controller is in the out (ON) position by turning clockwise (Fig. 8).
Electric Leg
Redundant Control
(Legs Open)
(Model dependent)
7. Push the UP and DOWN buttons on the hand control and confirm the boom will raise and
lower accordingly (Fig. 9).
NOTE: If your lift incorporates electric leg operation, confirm the legs open and close by
pushing the OPEN and CLOSE buttons on the hand control.
8. Prior to initial use, the service counter must be zeroed by an authorised dealer.
9. The lift is now ready for use.
8
UP (Raise)
Legs Open
(Model dependent)
Emergency Stop
Button
Redundant Control
(Emergency Lower)
Electric Leg
Redundant Control
(Legs Close)
(Model dependent)
DOWN (Lower)
Legs Close
(Model dependent)
English
Fig. 8
Fig. 9