Seca mBCA 555 Instrucciones De Uso página 118

Item Display element
Bioimpedance
measurement
I
J
K
Extended
L weighing func-
tions
4.3 Symbols on the ID display (menu)
118 • seca 555/554/552; seca 550/549; seca 257/256
Bioimpedance measurement (function available when the weight and height of the patient
have been determined):
• Start bioimpedance measurement
• Bioimpedance measurement completed, data can be submitted
• Bioimpedance measurement in progress (measurement progress in %)
• Bioimpedance measurement completed
• Checking electrodes
• Electrode check: electrodes OK, skin contact resistance OK
• Electrode check: electrodes OK, skin contact resistance too high
• Confirm measured results and send to EMR System
• Confirm manual input
• Press briefly: Open menu (è Configuration, page 147)
• Press and hold (approx. 5 seconds):
• Clear measured results
• Clear manual input
• Cancel automated procedures
• : Non-verifiable function active
• : function active
Hold Hold
• : or
NET Tare Pre-tare
• PT : Pre-tare function active
This section contains information about the display content for configuration and
administration. Information about the display content for measuring mode is
available here:
The configuration options in the menu are dependent on the device mode se-
lected:
è Changing device mode, page 147
•
è Functions/device mode, page 191
•
Description
è Changing device mode, page 147
function active
è Symbols on the ID display (main
screen), page 116.