Lincat CiBO Instrucciones De Instalacion Y Uso página 36

Safety Cut-out
This appliance is fitted with a safety thermostat, which will cut power to the appliance
under fault conditions. If the display works when switching on but the appliance does
not heat up, the safety thermostat may need re-setting. Push the red button on the
rear panel (Fig 3 G). This re-set cannot be activated until the appliance is cool. If this
continues to happen please call our service department.
Warranty Conditions
Your product has a manufacturer's warranty. This requires you to maintain and care
for your product following the maintenance and cleaning instructions. Only clean
using CiBO Sparkle (OC01) – other products may damage components and result in
a non-warranty service call. Always apply oven guard after cleaning. (OS01) If you
fail to maintain your oven or damage components during cleaning Lincat may charge
you for a warranty repair. Please check the website for terms and conditions.
Cleaning Guide
See separate cleaning guide for detailed cleaning method.
Wear protective clothing.
Do not use a water jet or steam cleaner, and do not immerse this appliance.
The oven should be cleaned regularly with Lincat Sparkle (OC01) oven cleaner and
all food deposits removed. When cool clean with warm water and mild detergent, do
not use tools or abrasive materials. Dry with a soft cloth and apply Oven Shield
(OS01).
Do not spray the catalytic converter with detergent or caustic oven cleaner.
Ensure all door seals are kept clean and inspected regularly to avoid microwave
leakage.
Failure to maintain the oven in a clean condition could lead to deterioration of the
surface that could adversely affect the life of the appliance and possibly result in a
hazardous situation.
Regularly check the air filter on the front of the oven. It may be cleaned in a
dishwasher. Do not use the oven without the filter.
IS 782 ECN 5060 Page 36 of 182