Publicidad
Idiomas disponibles
Idiomas disponibles
• Connect the connector to the outlet on the back of the device, by sliding the hose
connector into the slot on the back of the device.
• Extend the hose to the desired length, then pass the other end of the hose through the
window to allow air to escape to the outside.
• Installation with the window slide kit:
Depending on the size of your window, adjust the size of the window slider kit;
If the window height requires two window slides, use the bolt and nut to secure the window
slides once they are set to the proper length.
EN-17
Publicidad
