CASO DESIGN CM 1000 Ceramic Manual Del Usuario página 43

16.2 Operating elements
16.3 Signal tones
The appliance will emit the following signal tone as acoustic feedback:
 One signal tone: End of the cooking time.
16.3.1
Warning notices on device
ATTENTION
Danger due to hot surface!
There is a warning notice referring to dangers due to hot surfaces located on the back
upper side of the housing. The surfaces of the device can become extremely hot.
► Do not touch the hot surfaces of the device. Danger of burns!
► Do not set or lay any items on the device.
► Do not place the microwave appliance above a cooker, hob or another devices
producing heat, as this would damage the microwave appliance and render the
warranty void.
Control knob Power:
To set the desired microwave power level
Control knob Time:
To set the desiret time
► Always turn the control knob Time to 0, when you do not
use the device.
► Do not use the device, when it is empty. It could be
damaged.
Setting
Low
Defrost
Middle-low/ Defrost
Middle
Middle-high
High
Please note
Power in %
10 %
30 %
40 %
50 %
80 %
100 %
43