Publicidad
Idiomas disponibles
Idiomas disponibles
5 Service
Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained.
2.8
Specific Safety Instructions for Power
Tools
The term "power tool" in the warnings refers to mains-op-
erated (corded) power tool or battery-operated (cordless)
power tool.
a)
Our insulation is not insulation in the sense of VDE
standards: Hold the device at the insulated handle
surfaces when you perform work where the screw can
strike hidden power lines or your own power cable.
Contact between the screw and a live power line
could energize metal parts of the tool and cause an
electric shock.
b)
Hold the tool firmly. Be prepared for torque reaction.
c)
Reaction bars are recommended in applications with
limited space and when using:
-
Inline tools used above 4 Nm.
-
Pistol tools used above 10 Nm.
-
Angle tools used above 60 Nm.
d)
NEVER rest your hand on the reaction bar when
working.
e)
Check that the suspension bail is properly secured to
the balancer.
Personal Protective Equipment
► When working with rotating parts, it is not permitted to
wear gloves.
➢
Recommendation: Freely rotating u-GUARD pro-
tected fastening tools from APEX.
► Wear a hair net, if necessary.
Power Tool Use and Care
► Only use bits or sockets designed for industrial use
with machine-controlled tools.
► Make sure that the bit or socket is securely inserted.
► Do not attach the bit or socket to the screw head at an
angle.
► Inspect the bit or socket for visible damage and
cracks. Replace damaged screw bits immediately.
► Do not open the battery.
3
Items Supplied
•
Correct tool
•
Correct tool (without battery)
•
Instruction manual
•
EU Declaration of conformity
•
Warranty
•
CCBAWN(...): Additional handle
•
CCBPWN(...): Suspension bail
•
Calibration Certificate
Apex Tool Group
4
Transport / Storage
► Transport or store in the original packaging. The
packaging is recyclable.
► If the packaging is damaged, check the product for
visible damage. Inform the transporter, if necessary,
your Sales & Service Center.
► Disconnect the power supply during storage. Refer to
see chapter 8.4 Ambient conditions, page 13.
5
Product Description
Battery powered hand held nutrunner used for the tighten-
ing / loosening of threaded fasteners:
•
Work Light for secondary OK/NOK visual feedback.
•
"Stay Alive" function prevents reboot during battery
change. Stay alive time = 20 sec.
•
On-tool Digital Transducer and Servo provide critical
information and eliminate errors.
•
Connects easily over WLAN and Bluetooth 4.0.
Fig. 1-1: Product Description CCBAWN(...)/CCBPWN(...)
1
Micro USB-B Port
2
Display
3
Function Keys
4
Confirmation button
5
Work Light
6
Torque Multiplier
7
Reaction Bar
8
Output Square Drive
9
Additional handle
10
Start Trigger
11
Battery pack
P2506BA | REV D l 2023-10
1
EN
9
Publicidad
