Publicidad
Idiomas disponibles
Idiomas disponibles
MAINTENANCE
Recommended grade:
Per API:SG or higher or also with additional release status :
ACEA A3/ 96 (CCMC G5)
Recommended viscosity:
Viscosity depends on the outside temperature. For short while, the
temperature may exceed or fall short of the limits of the SAE grades.
The recommended viscosity SAE 10W/40 covers the ambient temperature
range -15°C to + 40°C and therefore represents the optimum for out latitudes.
Checking the final transmission oil
•
Stop the warmed-up engine, wait for approx. 5 minutes.
•
Propping up the scooter with the central stand.
•
Remove the oil filler screw (1) and check if the oil level is below the oil
filler opening.
•
If required, replenish transmission oil Hypoid SAE 85W-90 via the oil
filler opening.
•
When change new transmission oil, open the oil hole screw (2), till all
transmission oil is flow out, then tighten the screw (2) and add new oil
via the oil filter opening.
•
Tighten the oil filler screw (1).
44
Publicidad
