Stanley STEL861 Manual De Instrucciones página 19

b. Pressure that is too strong reduces the performance
capability of the tool and cause the grinding to
exhaust more quickly.
c. Be sure that the distance between the top of collet
chuck and bottom of the grinding wheel is less than
8mm and between the top of collet chuck and top of
grinding wheel is less than 45mm to prevent vibration
of the tool and unexpected accidents.(Fig. D)
Warning! Sparks generated when grinding metal.Take
care that no combustible material presented on the area
of flying sparks.
MAINTENANCE
Your tool has been designed to operate over a long period
of time with a minimum of maintenance. Continuous
satisfactory operation depends upon proper tool care and
regular cleaning.
Warning! Before performing any maintenance, switch
off and unplug the tool.
f Regularly clean the ventilation slots in your tool using
a soft brush or dry cloth.
f Regularly clean the motor housing using a damp
cloth. Do not use any abrasive or solvent-based
cleaner.
Important! To assure product Safety and reliability,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
LUBRICATION
STANLEY tools are properly lubricated and are ready
for use.
ACCESSORIES
The performance of your tool depends on the accessory
used. STANLEY accessories are engineered to high quality
standards and designed to enhance the performance of
your tool. By using these accessories you will get the very
best from your tool.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your STANLEY
product needs replacement, or if it is of no further
use to you, do not dispose of it with household
waste. Make this product available for separate
collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
SERVICE INFORMATION
STANLEY offers a full network of company-owned and
authorized service locations. All STANLEY Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service.
For more information about our authorized service
centers and if you need technical advice, repair,
or genuine factory replacement parts, contact the
STANLEY location nearest you.
SPECIFICATIONS
Power
No-load speed
Max chuck capacity
Max wheel diameter
Spindle
ENGLISH • 19
STEL861
500W
30000/min
25mm
6mm
M15