Service
a. Have your power tool repaired only by
qualifi ed specialists and use only original
spare parts. This ensures that the power tool
remains safe to operate.
b.Never service damaged batteries. All
maintenance work on batteries should only be
carried out by the manufacturer or authorised
customer service centres.
For use in dry environments only
Protection class II device
Please do not dispose off the
machine!
Wear safety glasses!
For your safety, always wear hearing
protection while working!
1 Key (Fig. 1)
1. Gear head
2. Rating plate
3. Motor housing
4. Speed control knob
5. Battery
6. Battery release button
7. Lock button
8. Grip
9. Grinding cylinder
10. Charger
11. Connecting cable
2 Description of the device
The WAS/A cylinder sander is the ideal device
both for fi ne-fi nishing surfaces by sanding,
brushing and satin-fi nishing and for cleaning
non-ferrous metals, steel and stainless steel.
It is also suitable for reworking chamfers and
curves.
A robust two-stage gearbox in a solid cast alu-
minium gearbox casing transmits power from
the carefully balanced and extremely quiet
permanent magnet DC motor, thus providing
enormous torque and a proper working speed
for the grinding or satin-fi nishing cylinder used.
In addition, the sensitive electronic control sys-
tem enables its optimum adaptation to suit the
most varied application purposes.
This means that the right speed and adequate
power are always available to work with!
And, to ensure that power is applied under
control and the sanding or satin-fi nishing tool
guided exactly, the device has a compact and
ergonomic housing with an integrated soft
component. An additional grip allows the device
to be guided exactly parallel to the surface. It is
therefore pleasant to hold at all times and can
be guided without fatigue.
Our WAS/A also offers fl exibility when selecting
the material to be fi nished. Available are both
grinding mop cylinders of various grain sizes
and a satin-fi nishing cylinder. This manual will
show you how to use your cylinder sander to
achieve the best results and all the other op-
tions it offers you!
The fl at end cap allows the device to be set up
vertically.
Powerful batteries in lithium-ion technology and
2.6 Ah capacity guarantee continuous, high per-
formance work. To charge the battery, it is simply
inserted into the charger and is ready for opera-
tion again within approx. 1 hour. For your safety
the process is thermally monitored.
3 Scope of delivery
Article 29825:
1 pc. WAS/A cylinder sander
1 pc. Charger
1 pc. Battery
1 pc. Storage case
- 17 -