Publicidad
Idiomas disponibles
Idiomas disponibles
When HI/LO limit alarm function is turned on and the measured temperature value is within
the high and low alarm limit range, the green LED lights up and the OK indicator is displayed,
indicating that the measured temperature is normal.
HI LO
In the HOLD interface, short press the SET button to enter the settings of high alarm limit
→ low alarm limit →emissivity → temperature unit → audible alarm → lock measurement,
etc. In these setting interfaces, pull the trigger or do not operate for 10s to return to the HOLD
interface.
In the HOLD interface, short press the SET button once to enter the high alarm limit setting
interface.
Short press the
is no desired value among the preset values, select any value closest to the high alarm limit,
and adjust it by pressing the
and add or subtract 10 per second by long press (see Figure 1).
Figure 1
In the HOLD interface, short press the SET button twice to enter the low alarm limit setting
interface, and adjust the low alarm limit value by pressing the
subtract 1 each time by short press, and add or subtract 10 per second by long press (see
Figure 2).
FUNCTION SETTING
HIGH ALARM LIMIT SETTING
button to quickly select the preset high alarm limit value (P1-P5). If there
button or
Figure 2
LOW ALARM LIMIT SETTING
HI LO
button. Add or subtract 1 each time by short press,
button or
HI LO
Figure 3
button. Add or
17
Publicidad
