Bosch VSS8394/01T Manual De Funcionamiento página 9

VSS8394/01T Multiplexer | Operating Manual | Chapter 2
pressed, a buzzer sounds, the action symbol is visible on
the monitor and the audio is set out.
Remark
The action button is only functional in combination
with an Alarm/Action box (optional).
2.1.6 ROTARY Wheel
During normal operation the ROTARY wheel is used to
select cameras. To acknowledge alarms, press the rotary
wheel, unless auto acknowledge is selected.
Turn the ROTARY wheel to select the previous or next
camera, (highlighted in a green border). Audio of the
selected camera is activated.
Press the ROTARY wheel to show the selected camera
in full screen mode.
2.1.7 Menu
After pressing the MENU button, the main menu will
be displayed. For a detailed description of the menu
operation see Chapter 2.2.
2.1.8 View
Pressing the view button enters the multi-screen mode
(Quad mode or 3x3 mode)
Quad mode
The screen displays a Quad view where 4 images are
displayed at the same time.
When no camera is connected or when covert display is
selected, the respective area is shown as a black image.
'3x3' mode
The screen displays a 3x3 view where the maximum of
8 images are displayed at the same time (image 9 is dis-
played as a black image with text information).
Turn the ROTARY wheel to select the previous or next
camera, (high-lighted in a green border).
Press the ROTARY wheel to show the selected camera
in full screen mode.
Figure 2. 1 Front Panel
Bosch Security Systems | 2003-06
When no camera is connected or when covert display is
selected, the respective area is shown as a black image.
2.1.9 Sequence
The monitor displays the connected camera images in
sequence. The dwell time (sequence time) is set up in
the System setup menus. When you are in the quad
mode, the quad images of the connected cameras are
also sequenced.
The camera title and the sequence symbols are visible
on the screen.
Remark
This mode is only functional when the observation sys-
tem has more than one camera.
2.1.10 Zoom
The image will be displayed in full screen and is digit-
ally zoomed to 200%. The zoom button toggles the
zoom mode ON/OFF. If the zoom mode is active, turn-
ing the ROTARY wheel scrolls the zooming area
through the nine pre-defined positions. A zoom symbol
is displayed. The zoom function is active for 30 secs or
until the zoom button is pressed before the 30 second
period
Remark
This mode is only functional in live mode when the
respective connected camera has zoom function.
2.1.11 Picture-In-Picture (PIP)
The PIP button toggles the Picture-In-Picture ON/OFF
(only in FULL screen mode).
Keeping the PIP button pressed while turning the rotary
wheel will scroll through all connected cameras.
Keeping the PIP select button pressed while pressing the
sequence button will toggle the sequence setting of the
PIP picture ON/OFF.
EN | 7