Hisense HRM260N6TSE Manual De Operaciones página 18

Connecting your refrigerator
After installing the Connectlife app,
sign in or create an account and
follow these steps:
1. Ensure the appliance is powered on
and the control panel is active. You
will know it is ready when the lights
that indicate temperature are on.
2. Put the refrigerator in pairing
mode by holding the
for 3 seconds. You will hear a
beep and see the Wi-Fi light
following icon：
3. Ensure Bluetooth is enabled on
your phone and open the
ConnectLife app. Look for the
pop-up indicating that a new
appliance has been found. Tap
the button on the pop-up and
follow the instructions to
proceed.
4.
If a pop-up doesn't appear, tap
the button called "Add appliance"
or "+" in the app.
button
℉/℃
5. Locate "Refrigerator" in the device
list and select it.
6.
Follow the instructions in the app
to connect your refrigerator.
Once the setup is complete, your
refrigerator will appear on your
home screen.
Note
•
The appaliance will remain in
pairing mode for a maximum of 5
minutes.
•
To factory reset your network
settings, press & hold the ℉/℃
button for 6 seconds. You will hear
two beeps once the appliance is
reset.
•
After resetting, the appliance will
automatically go into pairing mode.
•
A solid Wi-Fi light indicates the
appliance is successfully connected
to the home network.
18