Publicidad
Idiomas disponibles
Idiomas disponibles
Installing your new appliance
Before using the appliance for the first
time, you should be aware of the following
tips.
Warning
For proper installation, this refrigerator
must be placed on a level surface of hard
material that is the same height as the rest
of the flooring. This surface should be
strong enough to support a fully loaded
refrigerator.
The rollers, which are not casters, should be
only used for forward or backward
movement. Moving the refrigerator
sideways may damage your floor and the
rollers.
Ventilation of appliance
In order to improve efficiency of the
cooling system and save energy, it is
necessary to maintain good ventilation
around the appliance for the dissipation of
heat. For this reason, sufficient clear space
should be available around the
refrigerator.
Suggestion
It is advisable for there to be at least
2"(50mm) of clearance from the back of the
fridge to the wall, at least 1/2"(12mm) of
clearance from its top, at least 1/2"(12mm)
from its side to the wall and a clear space in
front to allow the doors to open 125°, as
shown in the following diagram.
1/2
"
Above
2"
Behind
1/2" Each Side
Note
This appliance performs well with
ambient temperature between 55°F (12.8°
C) to 110°F (43.3° C). The appliance may
not work properly if left at a temperature
above or below the indicated range.
Stand your appliance in a dry place to
avoid high moisture.
Keep the appliance out of direct sunlight.
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
6
Publicidad
